From Feb. 1987

Sunroof lid, installing

Work sequence




- install sunroof lid in opening
- start all screws and bolts but DO NOT TIGHTEN




- check that mark on rear guide aligns with mark on guide rail (both sides)
- adjust if necessary

Note: Sunroof drive gear must not be engaged when trying to check parallel running of sunroof cables.

CAUTION! When lining up cables to guide rail, always move cables from front of vehicle rearward to marking lines. Do not move cables from rear of vehicle forward to marking lines.




- check that serrations mesh on sunroof lid and rear guide

If NOT
- loosen screws (arrows) and adjust
- tighten screws
^ 2.0 Nm