Vacuum Brake Booster: Service and Repair

Brake Booster With Brake Master Cylinder:

CAUTION:
Do not perform repairs to brake booster or master cylinder.

1. Remove master cylinder as previously described.
2. Disconnect vacuum line(s) at booster.
3. Remove brake booster attaching bolts.
4. Disconnect booster pushrod at brake pedal.
5. Reverse procedure to install.

NOTE:
Brake booster and master cylinders from different manufacturers are interchangeable.
- Brake booster diameter:
^ 228.6 mm (9.0 in.).
- Master cylinder diameter:
^ 20.64 mm (0.81 in).