Brake/Clutch Pedal - New Alloy Bracket
86audi2Applies To
5000
from 1986 (see below)
Group
46
Subject
Brake/Clutch Pedal Components
Part Identifier N/A
Key Points
^ New alloy pedal bracket for manual transmission (with hydraulic clutch) and automatic transmission vehicles
A278
Number
86-04
November 12, 1986
Alloy pedal bracket installed in production:
5000S from VIN GA 073 363
5000CS Turbo from VIN GA 144 054
5000CS Turbo Quattro from VIN GA 180 000
Note
Grease all mounting points before assembly with G6 grease, Part No. AOS 126 000 05.
CAUTION
The brake pedal travel must not be restricted by extra carpeting or mats.
FIGURE 1 - CLUTCH MASTER CYLINDER CLEVIS, ADJUSTING:
a = 116.0 + 0.2 mm (4.56 + 0.008 in) b = clevis
CAUTION
If clutch pedal does not fully return, check for:
^ air in hydraulic system
^ restricted movement of pedal at mounting