Sunroof Motor, Installing

Sunroof motor, installing





CAUTION! Tightening sequence must be followed or will be noisy during operation

- start all screws but do not tighten

Note: Check that spacer is in place on screw 2 between sunroof motor and mounting point on root.

- tighten screws 1 (longer screws)
^ 2.0 Nm (1.4 ft lb)
- tighten screw 2 (shorter screw)
^ 2.0 Nm (1.4 ft lb)
- install electrical connectors and cover foam to prevent rattles
- install sunroof lid headliner trim
- install cover over sunroof motor
- install interior light