Exterior Parts Removal/Installation

Exterior Parts Removal/Installation

NOTE:
^ To adjust the doors in or out, replace the mounting bolts (A) with adjusting bolts; refer to the appropriate Parts Catalog for the necessary adjusting bolts.

^ The front fender mounting bolts are special corrosion-resistant bolts. Before installing the front fender, replace the insulation clips and the mounting bolts with new ones.

^ Apply spot sealer to the mating surfaces, then install the hood, the front fenders, the doors, the fuel fill door, the trunk lid, and the hinges.

^ Check the hood, the front fenders, the doors, and the trunk lid positions; refer to the external parts fitting positions.