Cargo Lamp: Testing and Inspection

Tailgate Light Test/Replacement

1. Open the tailgate.

2. Turn the tailgate light switch OFF.

3. Carefully pry the lens (A) off with a small screwdriver.









4. Remove the two screws, then remove the tailgate light (B).

5. Disconnect the 3P connector (C) from the light.

6. Check for continuity between the terminals in each switch position according to the table.





7. If the continuity is not as specified, check the bulb (D). If the bulb is OK, replace the ceiling light.

8. Install the light in the reverse order of removal.