The MID Beeper Does Not Sound When the BSI On/Off Button Is Pushed

Blind Spot Information System (BSI) Symptom Troubleshooting - The MID beeper does not sound when the BSI ON/OFF button is pushed

The MID beeper does not sound when the BSI ON/OFF button is pushed

NOTE:

- If the system malfunctions, always check for DTCs with the HDS.
- If a DTC is stored, troubleshoot the DTC first.

1. Check for DTCs with the HDS.

Are any DTCs indicated?

YES -

Troubleshoot the indicated DTC(s).

NO -

Go to step 2.

2. Do the gauge control module self-diagnostic function Testing and Inspection.

Does the side beeper sound?

YES -

Replace the BSI control unit BSI Control Unit Removal/Installation.

NO -

Replace the gauge control module Service and Repair, and recheck.