Ignition Switch To On (II), D Indicator Comes On And Stays On In All Shift Lever Positions, Or Never Comes On At All

When you turn the ignition switch to ON (II), the D indicator comes on and stays on in all shift lever positions, or it never comes on at all

F-CAN communication line error

Gauge control module defective

PCM defective

Notes

Check the F-CAN communication line F-CAN Circuit Troubleshooting.

Notes

Check the F-CAN communication line by using the gauge control module self-diagnostic function.

Notes

Check the indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function.