Turning Ignition Switch On / Pressing Start/Stop Button to On Mode; D Indicator Comes On and Stays On / Never Comes On

When you turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, the D indicator comes on and stays on in all shift lever positions, or it never comes on at all

F-CAN communication line error

Gauge control module defective

PCM defective

Notes

Check the F-CAN communication line F-CAN Circuit Troubleshooting.

Notes

Check the F-CAN communication line by using the gauge control module self-diagnostic function.

Notes

Check the indicator drive circuit in the gauge control module by using the gauge control module self-diagnostic function.