Set Spd Doesn't Resume When Resume/Accel Button Pressed (Cruise Control Main Switch On, Set Speed Canceled Pressing Brakes

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Set speed does not resume when the resume/accel button is pressed (with the cruise control main switch turned on, and set speed temporarily canceled by pressing the brake pedal)

Do the cruise control combination switch test Service and Repair.

Do the cruise control input test Cruise Control (ECM/PCM) Input Test.

Test the resume/accel switch signal input.

Check for PGM-FI DTCs Initial Inspection and Diagnostic Overview.

Also check for

Open circuit, loose or disconnected terminals:
ORN, GRY wire