A/T Gear Position Indicator Does Not Indicate Shift Lever Positions

A/T gear position indicator does not indicate shift lever positions

Diagnostic Procedure:

1. Transmission range switch defective or out of adjustment

2. Shift cable broken or out of adjustment

3. Connection between shift cable and transmission or shift lever is worn

Also check for:

- Check for a stored DTC, and check for loose connections.
- Inspect the transmission range switch. If the transmission range switch fails the inspection, replace the switch. If the inspection is OK, check for proper transmission range switch installation, and adjust the shift cable.
- Check for a loose shift cable at the shift lever and the selector control lever.