Engine Does Not Crank (Without Keyless Access System)

Engine does not crank

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Check the PGM-FI main relays. Testing and Inspection

3. Check for loose battery terminals or connections.

4. Test the battery for a low state of charge. Testing and Inspection

5. Check the starter. Starter System Circuit Troubleshooting (Without Keyless Access System)

6. Check the starter cut relay 1 and starter cut relay 2. Testing and Inspection

7. Check the transmission range switch. Transmission Range Switch Test

8. Check the ignition switch or wire. Ignition Switch Test (Without Keyless Access System)

Also check for:

- Poor ground at G101