Air Cleaner Housing: Service and Repair

Air Cleaner Removal/Installation

1. Do the battery removal procedure. Removal and Replacement

2. Disconnect the MAF sensor/IAT sensor 5P connector (A).

3. Remove the harness clamps (B) and the bolt (C).

4. Loosen the band (D), then remove the air cleaner housing (E).

5. Install the parts in the reverse order of removal.
NOTE: When tightening the screw of the hose band (F), align the edge of the hose band (G) between the marks (H) (or within the mark (I)) painted on the hose band.

6. Do the battery installation procedure. Removal and Replacement