Error Code: XM ANTENNA Is Displayed (Without Acura Link)

Symptom Troubleshooting: Error code: XM ANTENNA is displayed

Error code: XM ANTENNA is displayed (without AcuraLink)

NOTE:

- Check the vehicle battery condition first.

- Check the connectors for poor connection or loose terminals.

1. Check the connector at the XM receiver.

Is the connector connected?
YES - Go to step 2.

NO - Reconnect the connector(s). If the error message does not go away, go to step 2.


2. Check the connector at the XM antenna.

Is the connector connected?
YES - Go to step 3.

NO - Reconnect the connector(s). If the error message does not go away, go to step 3.


3. Substitute a known-good XM antenna. Removal and Replacement

Is the error message gone?
YES - Replace the XM antenna. Removal and Replacement

NO - Go to step 4.


4. Substitute a known-good XM receiver. XM Receiver Removal/Installation (Without Acura Link)

Is the error message gone?
YES - Substitute a known-good XM antenna lead, and recheck. If the XM receiver receives a signal, replace the original XM antenna lead. If the symptom/indication is still present, replace the XM receiver. XM Receiver Removal/Installation (Without Acura Link)

NO - Replace the XM antenna lead.