Symptom Troubleshooting

Symptom Troubleshooting: Audio disc does not eject

Audio disc does not eject (without navigation)

NOTE:

- Check the vehicle battery condition first.

- Disc labels should not be used in the audio unit. They may jam and damage the player mechanism.

- Check the connectors for poor connections or loose terminals

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Turn on the audio unit.

Does the system turn on?
YES - Go to step 3.

NO - Go to audio unit power switch will not turn on. Audio Unit Power Switch Will Not Turn On (No Information Display and No Sound) (Without Navigation)


3. Check to see if the disc ejects correctly with no binding when you push the EJECT button.

Does the disc eject properly?
YES - Operation is normal.

NO - Substitute a known-good audio unit. Audio Unit Removal/Installation (Without Navigation) If the symptom/indication goes away, replace the audio unit.