82-1x

SRS DTC Troubleshooting: 82-1x (x can be 0 thru 9 or A thru F)

DTC 82-1x ("x" can be 0 thru 9 or A thru F):No Signal From the Inner Side Front Passenger's Weight Sensor

NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures Service and Repair and General Troubleshooting Information. Initial Inspection and Diagnostic Overview

1. Check the seat weight sensor connectors for loose or poor connections.

2. Clear the DTC memory. Initial Inspection and Diagnostic Overview

3. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, then wait for 10 seconds.

4. Read the DTC. Initial Inspection and Diagnostic Overview

Is DTC 82-1x indicated?
YES - Replace the front passenger's weight sensor assembly, Service and Repair then clear the DTC.

NO - Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. Initial Inspection and Diagnostic Overview If another DTC is indicated, troubleshoot the DTC.