34-01

EPS DTC Troubleshooting: 34-01

DTC 34-01: Power Relay Stuck ON (Ignition Switch is in LOCK (0))

1. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

2. Clear the DTC with the HDS.

3. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.

4. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode.

5. Check for DTCs with the HDS.

Is DTC 34-01 indicated?
YES - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit. Service and Repair

NO - Troubleshoot the indicated DTC. If there are no DTCs, the system is OK at this time.