B12E0

DTC Troubleshooting: B12E0

DTC B12E0: Electric Steering Lock Switch Internal Error

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A. Troubleshooting - B-CAN System Diagnosis Test Mode A

1. Clear the DTCs with the HDS.

2. Do this procedure at least 10 times: Press the engine start/stop button to select the OFF, ACC, ON, and OFF mode.

3. Check for DTCs with the HDS.

Is DTC B12E0 indicated?
YES - Replace the electric steering lock. Steering Lock Replacement (Without Keyless Access System)

NO - Intermittent failure, the system is OK at this time.