DTC 108

DTC 107: TCS Operation

DTC 108: VSA Operation

NOTE: The ABS/VSA indicators do not come on by memorizing the DTC 107 or DTC 108.

1. Clear the DTC using the HDS.
2. Turn the ignition switch OFF.
3. Disconnect the HDS from the 16P DLC.
4. Test-drive the vehicle.

Is DTC 107 or DTC 108 indicated?

YES - Check for loose terminals in the VSA modulator-control unit 47P connector. If necessary, substitute a known-good VSA modulator-control unit, and recheck.

NO - The system is OK at this time. Refer to intermittent failures.