Oil Pan: Specifications
Oil PanK20A3 Engine
Tighten the bolts in two or three steps. In the final step, tighten all bolts in sequence to 12 Nm (1.2 kgf-m, 8.7 ft. lbs.). Wipe off the excess liquid gasket on the each side of crankshaft pulley and flywheel/drive plate.
K20Z1 Engines
Tighten the bolts in two or three steps. In the final step, tighten all bolts in sequence to 12 Nm (1.2 kgf-m, 8.7 ft. lbs.). Wipe off the excess liquid gasket on the each side of crankshaft pulley and flywheel/drive plate.