Engine Controls - MIL ON/DTC P0128 Is Stored In Memory

02-009

October 22, 2011

Applies To:
2002 RSX (except Type S) - From VIN JH4DC5...2C000001 thru JH4DC5...2C021560

MIL Comes On With DTC P0128
(Supersedes 02-009, dated July 23, 2011, to update the information marked by the black bars and asterisks)

REVISION SUMMARY

*Under WARRANTY CLAIM INFORMATION, the flat rate time was changed.*

SYMPTOM

The MIL is on and DTC P0128 (cooling system malfunction) is set.

PROBABLE CAUSE

The ECM/PCM incorrectly calculates the engine coolant temperature.

CORRECTIVE ACTION

Update the ECM/PCM software from the ACURALINK CD (March 2002 version or later).





WARRANTY CLAIM INFORMATION

In warranty:
The normal warranty applies.

Failed Part: P/N 37820-PND-A05 (M/T)
P/N 37820-PND-A54 (A/T)

Defect Code: 072

Contention Code: B03

Skill Level: Repair Technician

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

1. Use the PGM Tester to clear the DTC.

*2. Update the ECM/PCM software. Refer to Service Bulletin 01-026, Updating Control Units/Modules.*





DISCLAIMER