Headlamp Switch: Service and Repair

SRS components are located in this area. Review the SRS component locations, precautions, and procedures in SRS before performing repairs or service.

1. Remove the dashboard lower cover, and disconnect the connectors.

Headlight/Turn Signal Switch Replacement:

2. Remove the dashboard lower pad.

Headlight/Turn Signal Switch Replacement:

3. Remove the tilt cover.

Headlight/Turn Signal Switch Replacement:

4. Remove the steering column covers.

NOTE: Be careful not to damage the steering column covers.

5. Disconnect the 18P and 10P connectors.

CAUTION: Be careful not to damage the SRS wire harness.

Headlight/Turn Signal Switch Replacement:

6. Remove the six screws, then remove the headlight turn signal switch assembly.

Headlight/Turn Signal Switch Replacement:

7. If necessary, remove the turn signal cancel unit and cancel switch.

Headlight/Turn Signal Switch Replacement:

8. If necessary, remove the headlight switch bulb.