Main Valve Body

Main Valve Body, Valve Location And Identification:

Main Valve Body, Sectional View:

NOTE:
- Do not use a magnet to remove the check valve ball; it may magnetize the ball.
- Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air. Blow out all passages.
- Check all valves for free movement. If any fail to slide freely, repair as described under "General Repair".
General Repair

- Replace the valve body as an assembly if any parts worn or damaged.
- Coat all parts with ATF during assembly.
- Install the filter in the direction shown.