Service Specifications

GENERAL:
Pin to Rod Interference 0.017 - 0.036 mm (0.0007 - 0.0014 inch)
Small End Bore Diameter 20.964 - 20.997 mm (0.8254 - 0.8267 inch)
Large End Bore Diameter (Nominal) 48.0 mm (1.89 inch)

END PLAY INSTALLED ON CRANKSHAFT:
Standard (New) 0.15 - 0.30 mm (0.006 - 0.012 inch)
Service Limit 0.40 mm (0.016 inch)

TORQUE:
Connecting Rod Nuts 44 Nm (33 ft. lbs.)