Wheels

FRONT AND REAR WHEEL AXIAL RUNOUT:
Standard:
Steel Wheel 0 - 1.0 mm (0 - 0.04 inch)
Aluminum Wheel 0 - 0.7 mm (0 - 0.03 inch)
Service Limit 2.0 mm (0.08 inch)

FRONT AND REAR WHEEL RADIAL RUNOUT:
Standard:
Steel Wheel 0 - 1.0 mm (0 - 0.04 inch)
Aluminum Wheel 0 - 0.7 mm (0 - 0.03 inch)
Service Limit 1.5 mm (0.06 inch)

TIGHTENING SPECIFICATIONS
Nuts 108 Nm (80 ft. lbs.)