Wheel Speed Sensor

FRONT:
Wire to Chassis bolts 9.8 Nm (7 lb.ft.)
Wire to Knuckle bolts 9.8 Nm (7 lb.ft.)
Sensor to Knuckle bolts 22 Nm (16 lb.ft.)
Pulser/Sensor Air Gap 0.4 - 1.0 mm (0.02 - 0.04 in)

REAR:
Sensor to Knuckle bolts 22 Nm (16 lb.ft.)
Wire to all other components 9.8 Nm (7 lb.ft.)
Pulser/Sensor Air Gap 0.4 - 1.0 mm (0.02 - 0.04 in)