Crankshaft Position Sensor: Service and Repair

Replacement Procedure

1. Move the auto-tensioner to remove tension from the alternator belt, then remove the alternator belt.
2. Loosen the adjusting bolt, locknut and mounting bolt, then remove the Power Steering (P/S) pump belt.
3. Remove the dipstick and tube.
4. Remove the crankshaft pulley.
5. Remove the upper and lower covers.

NOTE: Do not use the upper and lower covers to store removed items.

6. Remove the Crankshaft Position (CKP) sensor from the oil pump.
7. Install the CKP sensor in reverse order of removal.